Puretec Hiflow Replacement - Retrofit Kit
The PureMix Z2-HFR is a complete kit that allows you to upgrade your existing under sink, and inline water to a premium Puretec system. The kit includes both stem adaptors, reducers and sockets so it can be connected to either a mixer or dedicated filter tap. It's compact design with quick-connect fittings makes it easy to replace your current system and can be installed either horizontally or vertically.
The Z2 cartridge features Z Plus Filtration Technology through an advanced 3 stage filtration process; filtering down to 1 micron* and reducing chlorine, chemical, sediment, rust, and algae - helping to ensure you only get healthy, great-tasting water on tap.
Retrofit kit to replace existing filters
•Max flow rate of 8 LPM
•3 stage, 10" cartridge, 1 micron
Model No
Z2-HFR-LF
Replacement Cartridge(s)
Min/Max Temperature
0 - 38°C (protect from freezing)
Min/Max Pressure
200 - 520˜ kPa
Micron Rating
1 micron*
Capacity
38,000 litres
Connection
1/2” BSP, 1/2” BSF or 1/4” tubing
Maximum Flow Rate
8 Lpm
Suits
C-T-HiFlow
Warranty
1 year^
Important Note: Use only genuine Puretec replacement cartridge. ^1 year warranty is 1 year parts and labour. Excludes cartridges. *Micron Rating is nominal. ˜Where line pressure exceeds 500 kPa, an approved pressure limiting device must be installed to comply with Australian & New Zealand Plumbing Standards. (Ref. AS/NZS 3500.1:2021, Clause 3.3.4). (^Capacity is based on inlet chlorine @2ppm ±10%). Refer to the Spec Sheet and User Guide for a full breakdown of installation requirements.
